top of page

AUTOMATIC DIRECTIONAL ANGLE CUT-OFF SAW WITH ROTARY TABLE

  SC-610  

   

AUTOMATIC DIRECTIONAL ANGLE CUT-OFF SAW WITH ROTARY TABLE

缺圖片-01.jpg

FEATURES

Advanced Servo Controlled System

● Performing part cutting and fixed size cutting for meeting various cutting requirement.
● Fast processing speed、high stability and cutting accuracy.
● It is used for building materials and mass material preparation. 
● Automatic trimming off head workpiece.
● Standard 100 sets of memory data and for optional to be able to connect with USB slot. 
● Feeding speed up to 60 M/ min.
● Opting for lengths of infeed table to customer's requirement.

SPECIFICATIONS

 

● Cutting capacity (Thickness x Width)

    45˚ angle - 190 x 120mm

● Table swiveling angle:+60˚~ 0˚~ - 60˚ 

● Saw blade diameter:ø24"

● Saw arbor diameter :30mm

● Saw blade speed:1600 rpm 

● Dust exhaust diameter:ø4" x (1), ø5" x (1)

● Saw arbor motor: 10HP/ 15HP

● Working air pressure:5~7 kg / 80 cm²

● Table size :1173 x 1173mm

● Net weight:1200 kgs

● Gross weight:1450 kgs

● Packing dimensions (LxWxH):1550 x 1550 x 2070mm

*We reserve the right to modify design without prior notice.

Infeed Side Pressure Device

Infeed Side Pressure Device 

 

● Making sure the precision of angle direction when cutting the workpiece.

Dual-pressure Air Cylinder

Dual-pressure Air Cylinder

 

● Making sure to cut the workpiece smoothly and to prevent it from loosen.

Guide Rod

Guide Rod 

 

It will descend to prevent the workpiece from moving and make sure to push workpiece smoothly after finishing cutting angle.

Touch Screen

Touch Screen

● Having cutting modes, parameter setting, record and alarm message.

● Automatic controlled feeding device driven by servo motor: According to the inputted value of cutting length, PLC system evaluates the length of workpiece and performs cutting action.

Automatic Position System

● The fast moving pusher reaches a maximum distance of 60 m/min with perfect position.

Pushing Fence

● According to the appointed length and quantity, pushing the workpiece and cutting it out till finishes all of work. After then reset pushing and cutting action.

YUH FARN

MACHINERY INDUSTRIAL CO., LTD.

ADDRESS :

No.9, Ln. 306, Sec. 6, Fengyuan Blvd., Fengyuan Dist., Taichung City 42079, Taiwan

E-MAIL : yuhfarn@ms32.hinet.net 

TEL : +886-4-25288863 / 25299403

FAX : +886-4-25254171

bottom of page